Similar to what we do for addx. Since we're calculating b - a and
because subtraction is not communitative, we can only apply this when
source register a holds the constant.
Before:
45 8B EE mov r13d,r14d
41 83 ED 08 sub r13d,8
After:
45 8D 6E F8 lea r13d,[r14-8]
We can get away with skipping the addition when we know we're dealing
with a constant zero. Just a MOV will suffice in this case.
Once again, we don't bother to add separate handling for when overflow
is needed, because no titles would ever hit that path during my testing.
Before:
8B 7D F8 mov edi,dword ptr [rbp-8]
83 C7 00 add edi,0
After:
8B 7D F8 mov edi,dword ptr [rbp-8]
ADD has a smaller encoding for immediates that can be expressed as an
8-bit signed integer (in other words, between -128 and 127). MOV lacks
this compact representation.
Since addition allows us to swap the source registers, we can always get
the shortest sequence here by carefully checking if we're dealing with a
small immediate first. If we are, move the other source into the
destination and add the small immediate onto that. For large immediates
the reverse is preferrable.
Before:
41 BE 40 00 00 00 mov r14d,40h
44 03 75 A8 add r14d,dword ptr [rbp-58h]
After:
44 8B 75 A8 mov r14d,dword ptr [rbp-58h]
41 83 C6 40 add r14d,40h
Before:
44 8B 7D F8 mov r15d,dword ptr [rbp-8]
41 81 C7 00 68 00 CC add r15d,0CC006800h
After:
41 BF 00 68 00 CC mov r15d,0CC006800h
44 03 7D F8 add r15d,dword ptr [rbp-8]
When the source registers are a simple register and a constant zero and
overflow isn't needed, emitting LEA is kinda silly.
This will occasionally save a single byte for certain registers due to
how x86 encoding works. More importantly, LEA takes up execution
resources while MOV does not.
Before:
41 8D 7D 00 lea edi,[r13]
After:
41 8B FD mov edi,r13d
When the destination register matches a source register, the other
source register contains zero, and overflow isn't needed, the
instruction becomes a nop and we don't need to emit anything.
We could add specialized handling for the case where overflow is needed,
but none of the titles I tried would hit this path.
Before:
83 C7 00 add edi,0
After:
No functional change, just simplify some repeated logic in the case
where we're dealing with exactly one immediate and one simple register
when overflow isn't needed.
On some platforms (like Windows), the temporary file must be closed
before it can be renamed.
I guess nobody noticed this for so long because (1) the FS code has a
failsafe for missing FST entries (because existing users do not have
a FST), and most games do not care about file metadata;
(2) the write failures can only be seen in the logs.
Because we don't want this to break, I have turned the ERROR_LOGs into
PanicAlerts.
The threads can't actually be started when determinism is enabled, as
the behavior would not be deterministic, but Open() still tries to
start the threads and wait, resulting in a deadlock when booting
certain games and homebrew in NetPlay.
https://bugs.dolphin-emu.org/issues/11997
The problem seemed to be that s_DILENGTH would get set to 0
at times when it shouldn't. Simply not changing it in case
of NoReply or DTK seems to fix the problem. However, we can
actually go one step further in accuracy and use data.size()
to change s_DIMAR and s_DILENGTH as partial reads (NoReply
commands) complete, instead of jumping directly to 0 when
the whole read completes.
It used to be the case that frame advance skipped duplicate frames
(i.e. it would take 30 frame advances to get through one second
of emulated time in a 30 fps game), but this broke in 9c5c3c0.
Skipping duplicate frames making TASing less annoying.
For some reason every button group was shoved into the same config
group called "Keys" which caused buggy behavior once someone tried to
have hotkeys with the same name in different groups. This fixes that,
and converts existing configs to the new group names so they don't get
reset.
When booting a Wii game, Dolphin can overwrite certain settings
in the SYSCONF file, such as turning off PAL60 for NTSC games.
Normally, these settings get reverted at the end of emulation, but
this does not happen if Dolphin crashes or force quits in some other
way. (Personally, I have a tendency to use Visual Studio's Stop
Debugging button, which kills the process...)
Dolphin also overwrites certain values in setting.txt when booting
a Wii game. Unlike with SYSCONF, we currently make no effort to
preserve the original values in this file.
This change fixes both of these problems by copying SYSCONF and
setting.txt to the Backup folder when booting a Wii game, and then
copying them back either when launching Dolphin (in case the
previous run of Dolphin crashed) or when ending emulation.
This commit attempts to improve error handling for device opening by
reducing panic alert spam when opening one or several devices fails.
Currently, Dolphin shows a panic alert for every device that we fail
to open, and another panic alert at the end if no usable device was
found. That is certainly a bit excessive -- we should only keep the
very last panic alert (the one that is shown if everything fails)
and we can just put the error for the last device open operation there.
This also changes the PanicAlert to a CriticalAlert to ensure the
message is visible even if the user has disabled regular panic alerts.
The message has also been reworded and should hopefully be clearer.
This is related to https://bugs.dolphin-emu.org/issues/10958 which
uses Qt to clear out the window so the game list isn't displayed
while the core is booting. Instead, we use the video backend to
render a black screen, which means Qt doesn't have to flip between
paint engines.
Without included header build fails on gcc-10 as:
```
[ 52%] Building CXX object Source/Core/Core/CMakeFiles/core.dir/DSP/DSPTables.cpp.o
../../../../Source/Core/Core/DSP/DSPTables.cpp: In function 'const char* DSP::pdname(u16)':
../../../../Source/Core/Core/DSP/DSPTables.cpp:492:3: error: 'sprintf' was not declared in this scope
492 | sprintf(tmpstr, "0x%04x", val);
| ^~~~~~~
```
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
